Hard water can cause some hair and skin problems. Traditional water softening methods are not only ineffective, but also require some time to use. The best way to deal with hard water is to install a water softener. Depending on the requirements of a house, it could be a whole house or a point of use type. This machine works by replacing sodium ions with magnesium and calcium to soften the water. Soft water has different household uses and therefore could keep your hair and skin safe.
Maintenance of a water softener
To maintain such products, it would be useful to keep in mind the following tips:
Check the salt level
The first step in maintaining a water softener is to inspect the salt levels. This is because as the salt level decreases, the water begins to harden. Checking salt levels regularly can prevent common hard water problems. While the general rule of thumb is to check salt levels every 4-6 weeks, the frequency can vary depending on the type of equipment and hardness level, among several other factors.
Examine the salt bridges
When using a water softener regularly, a layer of hardened salt bridge can be seen in the brine tank. Salt bridges are sometimes caused by the poor quality of the salt used, humidity, or high temperatures. When there are salt bridges, this prevents the resin beads in the product from regenerating. That being said, it is crucial to inspect the brine tank and clean it regularly to prevent salt bridges from building up inside. However, this must be done carefully as improper cleaning can damage the walls of the water softener.
Clean brine tank
Today, the brine tank in water softeners rarely requires cleaning. However, it is better to ensure that it is cleaned occasionally to avoid problems. Before cleaning the brine tank, it is important to review the owner’s manual for the proper way to clean the tank. In order for the product to work efficiently, it is best to clean the brine tank every six to twelve months.
Check the water purifier regularly
It is not enough to check the salt levels. It is also essential to check the condition of the softener every three or four months. This is because the water softener brine tank may have excessive salt buildup. The bridge, as it is also known, prevents the salt from coming into contact with the water. This interferes with cleaning the resin bed, making the process difficult.
Use the right kind of salt
Many people just use the old salts they see at home for their water softener. For the best result, they should use the proper salt instead of any old salt available at home. The two ideal types of salts that can be used for this purpose are Cubes and Crystals. Most softeners use cubed salts, but it’s best to check your manual to determine the type of salt that will suit your machine.
Rinse the resin bed
Resin beds must be recharged with salt periodically. The resin bed can also be rinsed from time to time with a water softening cleaner. The product becomes less efficient in the presence of iron, heavy metals, and other organic compounds. To maintain its effectiveness, it is recommended that you clean the resin bed from time to time.